Lesco Weed and Feed Spreader Settings

For many years, Agri Fab has produced some of the most popular spreaders in the market. After all, these products come with great features for taking care of your lawn or garden.

Aside from these specs, the Agri Fab spreaders are easy to use. But if you are not sure of the right settings, you might not get the best results from the spreaders.

Sadly, many people do not know the best ways that you can adjust an Agri Fab spreader. If you are amongst such users, you can use this article as a guide for working with this device.

agrifab spreader settings guide

Agri Fab Spreader Settings Guide

Here is everything you need to know about Agri Fab spreader settings. But before using this guide, you should consult the Agri Fab manual for additional advice.

Agri Fab Spreader Setting Guide for Powdered Fertilizers

  • Flow Setting = ( 3 – 5)
  • Spread Width = 3′ – 4′
  • Operating Speed = 3 MPH

If you are applying powered fertilizer to your lawn or garden, you will have to use a flow setting of 3 – 5. As for the spread width, stick to 3″- 4″.

Agri Fab Spreader Setting for Granular Fertilizers

  • Flow Setting = ( 3 – 5)
  • Spread Width = 8′ – 10′
  • Operating Speed = 3 MPH

Before using the Agri Fab spreader for a granular fertilizer, you should choose a setting of 3 – 5. Ideally, this setting should go with a spread width of 8′ – 10′.

Agri Fab Spreader Setting for Pelletized Fertilizers

  • Flow Setting = ( 3 – 5)
  • Spread Width = 10′ – 12′
  • Operating Speed = 3 MPH

As expected, the Agri Fab Spreader works well with pelleted fertilizers. To disperse such material, the flow setting should stay between 3 -5 while the spread width is 10′ – 12′.

Agri Fab Spreader Settings for Organic Fertilizers

  • Flow Setting = ( 6 – 8)
  • Spread Width = 6′ – 8′
  • Operating Speed = 3 MPH

To adjust the flow setting for organic fertilizer, pick a value between 6 – 8.  At this rate, you should also use a spread width of 6′ – 8′.

Agri Fab Spreader Settings for Fine Grass Seed

  • Flow Setting = 3 – 4
  • Spread Width = 6′ – 7′
  • Operating Speed = 3 MPH

Asides from fertilizers, the Agri Fab Spreader can help disperse fine grass seeds. If you want to use the spreader for this task, choose a flow setting of 3 – 4.

Agri Fab Spreader Settings for Rough Grass Seed

  • Flow Setting = 4 – 5
  • Spread Width = 8′ – 9′
  • Operating Speed = 3 MPH

For rougher varieties of seeds, you can work with a flow setting of 4 – 5. Normally, this setting goes with a spread width of 8′ – 9′.

Agri Fab Spreader Settings for Ice Melter

  • Flow Setting = 6 – 8
  • Spread Width = 10′ – 12 '
  • Operating Speed = 3 MPH

You can use the ice melter with the Agri Fab spreader. But to get the best results, the spreader should be used with a setting of 6 – 8.

How to Adjust Your Spreader Settings

Out of the box, the AgriFab Spreader might not have the settings that might suit your preferred material. For this reason, you will have to use the following steps to adjust your spreader.

  • Unscrew the nylon wing nut
  • Choose the recommended flow setting for your fertilizer, seed, or ice melter.
  • Tighten the nylon wing nut
  • Switch on the spreader by pulling the flow control arm against the adjustable stop
  • Turn off the spreader by pulling the flow control arm to the hopper.

How to Maintain the AgriFab Spreader Setting

To allow the AgriFab spreader to work perfectly, it would help if you took care of it. But if you skip this process, the settings might not work as expected. By using the following tips, your spreader should last longer and offer premium performance.

1. Clean the AgriFab Spreader

As dirt gathers around the Agri Fab Spreader, it tends to affect its performance. However, you can keep it in top shape by rinsing the hopper and the outer parts of the spreader. Then allow it to dry thoroughly before putting it in storage.

2. Tighten the Loose Parts

Do you notice any loose parts on your spreader? If yes, make the bolts and nuts tighter with the right tools. But if you are not great with tools, you can ask for help from a friend with some DIY experience.

3. Perform Regular Checks

Remember to check the spreader for worn-out parts or signs of damage. If you find anything out of the ordinary, you should fix them or ask for help from a professional.

4. Lubricate the Spreader

Apply some automotive grease to various parts of the spreader. These components should include the sprocket, gear, and bearings.

5. Store the Spreader Properly

After using the spreader, remember to place it in storage. If you are not sure of the right spot for it, keep the spreader in a cool, dry area.

Extra Tips for Using the AgriFab Spreader

As you use the Agri-Fab spreader, remember the following tips.

1. Avoid Lumpy Fertilisers

As clumps of fertilizers cannot go through the spreader, you will have to break them down into smaller bits. For this task, consider using a hammer or any heavy object.

2. Use the AgriFab manual

If you are not sure about the best settings for using the Agri-Fab spreader, try using its owner's manual. After all, this booklet has a chart that shows the best flow settings for the spreader.

3. Keep the Spreader from Moisture

Exposure to water can decrease the service life of your spreader. You can protect your spreader from moisture by using the vinyl cover. However, do not use this covering to keep the device from the rain.

4. Use with Care

Prevent the weed control fertilizers from touching your plants.  Also, use protective gloves and eyewear as you handle the fertilizers and chemicals.

5. Contact the Customer Care Centre

If you have any issues with using the AgriFab, you should reach out to their customer center via mail or phone call. You can also check their website for any information that might help you with the product.

  • Danny Saunders is a tech enthusiast. He enjoys getting his hands dirty with the features and settings of tech products and pushing them to their limits just to know how to get the best from them and how well they can endure "abuse" without breaking down. He shares his findings on this blog.

mylesroich1976.blogspot.com

Source: https://settingslab.com/agri-fab-spreader-settings-guide/

0 Response to "Lesco Weed and Feed Spreader Settings"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel